分板机分板厚度0.3-3.5mm分板机厂家特点
1、电气混合式设计，双直刀分切，特别适用于分割精密SMD薄板,铝线路板
Electric hybrid design, double straight knife cutting, especially suitable for cutting precision SMD sheet and aluminum circuit board
2、适用各种厚度PCB，切板行程在2mm以下，绝无操作安全上的顾虑
Suitable for PCB of various thickness, the cutting stroke is less than 2mm, and there is no concern on operation safety
3、将切板时所产生的内应力降至180μST以下,避免锡裂，防止精密零件受损
Reduce the internal stress produced during plate cutting to below 180 μ st, avoid tin crack and prevent damage to precision parts
4、可分切V槽边缘与零件宽度最小0.3mm,高度为50mm
The minimum width and height of V groove edge and parts are 0.3mm and 50mm respectively
5、刀具磨损后可免费翻磨
The tool can be turned over free of charge after being worn
分板机分板厚度0.3-3.5mm分板机厂家分享采购规格：
型号:YSVC-2
长度:330mm/200mm/130mm
外形尺寸(长×宽×高):720×300×440mm/520x300x440mm/500x300x440
分板厚度: 0.3-3.5mm
工作气压:0.50-0.70Mpa干燥气源
使用电压:220VAC
分板机分板厚度0.3-3.5mm分板机厂家分享机器重量:130kg/100kg/80kg
