关闭
点击这里给我发消息
点击这里给我发消息
 +86 0512-62751429
+86 13416743702
您好,欢迎您来到:苏州市宇顺力电子有限公司官网!服务热线:0512-62751429.
YUSH Electronic
新闻动态
气动铡刀式分板机的调刀方法吗
分板机通常是指baiPCB分板机,也就是线du路板分板机zhi。分板机被dao广泛应用于电子产品制造业回。由于传统的人答工折板方式会有很强的应力产生,对产品品质造成严重影响,所以人工折板已基本上被机器分板所取代。 分板机可分以下几种:
The board dividing machine usually refers to the baipcb board dividing machine, namely the line Du road board dividing machine. The board splitter is widely used in electronic products manufacturing industry. Due to the strong stress produced by the traditional manual folding method, which has a serious impact on the product quality, the artificial folding plate has been basically replaced by the machine. The dividing machine can be divided into the following types:
1、走刀式分板机,Knife type plate splitter
2、冲压式分板机,Stamping plate splitter
3、铣刀式分板机,Milling cutter type plate splitter
4、激光分板机、Laser splitter
5、铡刀式分板机。 Chopper type plate splitter
以上四种分板机的优缺点:
The advantages and disadvantages of the above four kinds of plate splitters
1、走刀式分板机 优点:成本低 缺点:只能进行直线分板。有毛边。
Advantages: low cost, disadvantages: can only carry out linear plate. It has a rough edge.
2、冲压式分板机 优点:首次投入成本低,速度快。缺点:由于必须专板专模,后期成本高。有应力 
Advantages: low cost and high speed for the first time. Disadvantages: due to the special plate and mold, the later cost is high. With stress
3、铣刀式分板机 优点:可进行任意形状分板,应力很小,切割边缘无毛边。缺点:首次成本较大。
Advantages of milling cutter type plate dividing machine: it can divide plates of any shape, with small stress and no burr on cutting edge. Disadvantages: high cost for the first time.
4、激光分板机 优点:同时具备铣刀式分板机的优点,并可对PCB板进行微分切,无应力。 缺点:机器价格昂贵。
Advantages of laser plate splitter: it has the advantages of milling cutter type plate splitter at the same time, and can perform differential cutting on PCB board without stress. Disadvantages: the machine is expensive.
5、铡刀式分板机 优点:纯气动(工厂常用气压即可),体积小巧(桌面式),出力大,可切任意宽度厚度的铝基板,性价比高.
Advantages: pure pneumatic (factory air pressure can be used), small size (desktop type), large output, can cut aluminum substrate of any width and thickness, high cost performance
产品分类
                                        当前位置: 首页 -> 新闻动态

                                        气动铡刀式分板机的调刀方法吗


                                        分板机通常是指baiPCB分板机,也就是线du路板分板机zhi。分板机被dao广泛应用于电子产品制造业回。由于传统的人答工折板方式会有很强的应力产生,对产品品质造成严重影响,所以人工折板已基本上被机器分板所取代。 分板机可分以下几种:
                                        The board dividing machine usually refers to the baipcb board dividing machine, namely the line Du road board dividing machine. The board splitter is widely used in electronic products manufacturing industry. Due to the strong stress produced by the traditional manual folding method, which has a serious impact on the product quality, the artificial folding plate has been basically replaced by the machine. The dividing machine can be divided into the following types:
                                        1、走刀式分板机,Knife type plate splitter
                                        2、冲压式分板机,Stamping plate splitter
                                        3、铣刀式分板机,Milling cutter type plate splitter
                                        4、激光分板机、Laser splitter
                                        5、铡刀式分板机。 Chopper type plate splitter
                                        以上四种分板机的优缺点:
                                        The advantages and disadvantages of the above four kinds of plate splitters
                                        1、走刀式分板机 优点:成本低 缺点:只能进行直线分板。有毛边。
                                        Advantages: low cost, disadvantages: can only carry out linear plate. It has a rough edge.
                                        2、冲压式分板机 优点:首次投入成本低,速度快。缺点:由于必须专板专模,后期成本高。有应力 
                                        Advantages: low cost and high speed for the first time. Disadvantages: due to the special plate and mold, the later cost is high. With stress
                                        3、铣刀式分板机 优点:可进行任意形状分板,应力很小,切割边缘无毛边。缺点:首次成本较大。
                                        Advantages of milling cutter type plate dividing machine: it can divide plates of any shape, with small stress and no burr on cutting edge. Disadvantages: high cost for the first time.
                                        4、激光分板机 优点:同时具备铣刀式分板机的优点,并可对PCB板进行微分切,无应力。 缺点:机器价格昂贵。
                                        Advantages of laser plate splitter: it has the advantages of milling cutter type plate splitter at the same time, and can perform differential cutting on PCB board without stress. Disadvantages: the machine is expensive.
                                        5、铡刀式分板机 优点:纯气动(工厂常用气压即可),体积小巧(桌面式),出力大,可切任意宽度厚度的铝基板,性价比高.
                                        Advantages: pure pneumatic (factory air pressure can be used), small size (desktop type), large output, can cut aluminum substrate of any width and thickness, high cost performance
                                        苏州宇顺力电子有限公司 版权所有 @ Copyright 2015 联系人:刘小姐 地址:苏州工业园春辉路11号5号厂房,切板机宇顺力厂家专业生产切板机FPC切板机冲床切板机FR4切板机切板机图片切板机方法模具切板机CNC切板机走刀切板机|非标切板机方案|铡刀类型切板机气动切板机电动切板机《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备14049770号-7
                                        联系我们
                                        #字型分板机华南地址:
                                        冲床分板机地址:广东省东莞市涌头村山泉路十号(总部)
                                        软板分板机咨询:13862072520
                                        PCB Router分板机电话:0769-88087410
                                        走刀切板机网址:http://www.szfbj.com
                                        华东在线切板机地址:
                                        全自动切板机地址:江苏省苏州市昆山市金阳东路1068号
                                        (国瑞产业园)
                                        邮票孔切板机电话:0512-62751429
                                        咨询基板切板机:13450659407
                                        裁切切板机邮箱:seles@hk-yush.com
                                        led切板机网址:http://www.yushunli.com
                                        苏州宇顺力电子有限公司 版权所有 @ Copyright 2015 联系人:刘小姐 地址:苏州工业园春辉路11号5号厂房,切板机宇顺力厂家专业生产切板机FPC切板机冲床切板机FR4切板机切板机图片切板机方法模具切板机CNC切板机走刀切板机|非标切板机方案|铡刀类型切板机气动切板机电动切板机《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备14049770号-7